Home Forums Blogs Articles Photos Videos Contact FAQ

Ship - Propulsion

Ship - Propulsion: Encyclopedia II - Ship - Propulsion

Until the application of the steam engine to ships in the early 19th century, oars propelled galleys or the wind propelled sailing ships. Before mechanisation, merchant ships always used sail, but as long as naval warfare depended on ships closing to ram or to fight hand-to-hand, galleys dominated in marine conflicts because of their maneuverability and speed. The Greek navies that fought in the Peloponnesian War used triremes, as did the Romans contesting the Battle of Actium. The use of large numbers of cannon from the 16th century meant that maneuverability took second place to broadside weight; this led to the dom ...

Ship: Encyclopedia II - Ship - Propulsion

Ship - Propulsion

Until the application of the steam engine to ships in the early 19th century, oars propelled galleys or the wind propelled sailing ships.

Before mechanisation, merchant ships always used sail, but as long as naval warfare depended on ships closing to ram or to fight hand-to-hand, galleys dominated in marine conflicts because of their maneuverability and speed. The Greek navies that fought in the Peloponnesian War used triremes, as did the Romans contesting the Battle of Actium. The use of large numbers of cannon from the 16th century meant that maneuverability took second place to broadside weight; this led to the dominance of the sail-powered warship.

The development of the steamship became a complex process, the first commercial success accruing to Robert Fulton's North River Steamboat (often called Clermont) in the USA in 1807, followed in Europe by the 45-foot PS Comet of 1812. Steam propulsion progressed considerably over the rest of the 19th century. Notable developments included the condenser, which reduced the requirement for fresh water, and the multiple expansion engine, which improved efficiency. As the means of transmitting the engine's power, the paddle wheel gave way to the more efficient screw propeller. The marine steam turbine developed by Sir Charles Algernon Parsons, brought the power to weight ratio down. He had achieved publicity by demonstrating it unofficially in the 100-foot Turbinia at the Spithead Naval Review in 1897. This facilitated a generation of high-speed liners in the first half of the 20th century and rendered the reciprocating steam engine out of date, in warships.

The marine diesel engine first came into use around 1912: either the Vulcanus or the Selandia (depending upon who you talk to) first deployed it. It soon offered even greater efficiency than the steam turbine but for many years had an inferior power-to-space ratio. About this period too, heavy fuel oil came into more general use and began to replace coal as the fuel of choice in steamships. Its great advantages were the convenience and the reduction in manning owing to the removal of the need for trimmers and of stokers in the old-fashioned numbers.

Most ships built since around 1960 have used diesel power or motors; one exception, Queen Elizabeth 2 of 1968, started with steam turbines but subsequently converted to diesel as a cost-saving measure.

A few ships have used nuclear reactors, but this is not a separate form of propulsion. It merely makes steam to drive the turbines. Nonetheless, it has caused concerns about safety and waste disposal. It has become usual only in large aircraft carriers and in submarines, where the ability to run submerged for long periods holds obvious advantage. In such long-endurance vessels, the saving in bunkerage too, is an important consideration.