Ship: Encyclopedia II - Ship - Measuring ships

Ship - Measuring ships

One can measure ships in terms of overall length, length of the waterline, beam (breadth), depth (distance between the crown of the weather deck and the top of the keelson), draft (distance between the highest waterline and the bottom of the ship) and tonnage. A number of different tonnage definitions exist; most measure volume rather than weight, and are used when describing merchant ships for the purpose of tolls, taxation, etc.

In Britain until the Merchant Shipping Act of 1876, ship-owners could load their vessels until their decks were almost awash, resulting in a dangerously unstable condition. Additionally, anyone who signed onto such a ship for a voyage and, upon realizing the danger, chose to leave the ship, could end up in jail.

Samuel Plimsoll, a member of Parliament, realised the problem and engaged some engineers to derive a fairly simple formula to determine the position of a line on the side of any specific ship's hull which, when it reached the surface of the water during loading of cargo, meant the ship had reached its maximum safe loading level. To this day, that mark, called the "Plimsoll Mark", exists on ships' sides, and consists of a circle with a horizontal line through the center. Because different types of water, (summer, fresh, tropical fresh, winter north Atlantic) have different densities, subsequent regulations required painting a group of lines forward of the Plimsoll mark to indicate the safe depth (or freeboard above the surface) to which a specific ship could load in water of various densities. Hence the "ladder" of lines seen forward of the Plimsoll mark to this day.

Adapted from the Wikipedia article "Measuring ships", under the G.N U Free Docmentation License. Please also see http://en.wikipedia.org/wiki